Skip to main content

Parts & Accessories

Snowmobile Drive Belt: When to Replace It, Signs of Wear and Carrying a Spare

By the Groupe Contant Team · Published November 3, 2026

Snowmobile Drive Belt: When to Replace It, Signs of Wear and Carrying a Spare

Quick Answer

When should you replace a snowmobile drive belt?

BRP doesn't set a kilometre interval: the belt is replaced based on its condition. Inspect it before every ride and replace it if it shows cracks, uneven wear, flat spots, fraying, glazing or missing cogs. Inconsistent acceleration or a lower top speed can also point to a worn belt. For most riders, BRP recommends starting each season with a fresh belt.

The drive belt carries the engine's power to the track through the continuously variable transmission (CVT). According to BRP, it's the part that fails most often on a snowmobile, and a belt that breaks on the trail can leave you stranded far from anywhere.

This guide sums up what BRP recommends for inspecting the belt, spotting wear and avoiding getting stuck on the trail.

Signs of a Worn Belt

  • Cracks in the belt.
  • Uneven wear or flat spots.
  • Frayed edges.
  • Glazing.
  • Missing cogs.
  • Inconsistent acceleration or a lower top speed than usual.

Inspect Before Every Ride

BRP recommends a quick look at the belt before every ride, and checking that it sits properly in the clutch. On most models, the valley between the bottom cogs of the belt should be even with the top edge of the pulley; the exact value for your snowmobile is in the operator's guide.

Before working on the sled, remove the tether cord. BRP reminds riders never to run the engine without the belt securely installed, or with the side panels open or removed.

Carry a Spare Belt

Since the belt is the part most likely to fail, BRP recommends carrying a spare belt and a small tool kit, especially for long rides and backcountry riding. Choose the belt that exactly matches your model and model year: the part number is in the operator's guide, or we can find it for you.

Frequently Asked Questions

BRP doesn't set a kilometre interval: the belt is replaced based on its condition. Inspect it before every ride and replace it if it shows cracks, uneven wear, flat spots, fraying, glazing or missing cogs. Inconsistent acceleration or a lower top speed can also point to a worn belt. For most riders, BRP recommends starting each season with a fresh belt.

In our store

In stock now · Snowmobiles · Drive & Belts

See all →

Parts & accessories: request online, pay and pick up in store.

Groupe Contant — Your Quebec Dealer

Find a spare drive belt for your snowmobile in our parts and accessories store.